徐剑

2006-2010 中科院上海光机所 博士

2003-2006 中南大学 硕士

1999-2003 中南大学 本科

2022-至今 华东师范大学 教授

2017-2022 华东师范大学 副研究员

2010-2016 日本理化学研究所 博士后

长期从事超快激光微纳制造研究。发表论文60余篇，出版英文专籍章节5项，授权中/美发明专利多项。

主持基金委面上、省部级人才计划等项目，同时参与基金委重大、重点、市级科技重大专项等项目。

Optics & Laser Technology, Optics and Lasers in Engineering, Journal of Laser Applications, Photonics Research, Optics Express, Optical Materials Express, Applied Optics, Applied Surface Science, Applied Physics Express, Advanced Materials Technologies, Advanced Functional Materials, Advanced Healthcare Materials, Additive Manufacturing, Light: Advanced Manufacturing, Engineering等学术期刊审稿人。

研究小组隶属于华东师范大学极端光机电实验室程亚教授研究团队。

研究方向： 超快激光微纳制造；透明电介质微结构及器件；光流控。

以下一些文献资料可供参考。

超快激光制备

https://doi.org/10.1038/lsa.2014.30   
https://doi.org/10.1039/C4LC00548A   
http://dx.doi.org/10.1007/978-3-030-59313-1_8 

光流控

https://www.nature.com/subjects/optofluidics

https://doi.org/10.1016/j.optlastec.2021.107118 
https://doi.org/10.1016/j.optlastec.2022.108889   

《大学物理》

Full publications

https://orcid.org/0000-0003-0067-6230   
https://www.webofscience.com/wos/author/record/954155     

Selected publications

[6] Z. Lin, J. Xu*, Y. Song, X. Li, P. Wang, W. Chu, Z. Wang, Y. Cheng*, Freeform microfluidic networks encapsulated in laser printed 3D macro-scale glass objects, Adv. Mater. Technol. 5, 1900989 (2020).

[5] X. Li, J. Xu*, Z. Lin, J. Qi, P. Wang, W. Chu, Z. Fang, Z. Wang, Z. Chai, Y. Cheng*, Polarization-insensitive space-selective etching in fused silica induced by picosecond laser irradiation, Appl. Surf. Sci. 485, 188~193 (2019).

[4] J. Xu, X. Li, Y. Zhong, J. Qi, Z. Wang, Z. Chai, W. Li, C. Jing*, Y. Cheng*, Glass‐channel  molding assisted 3D printing of metallic microstructures enabled by femtosecond laser internal processing and microfluidic electroless plating, Adv. Mater. Technol. 3, 1800372 (2018).

[3] J. Xu*, H. Kawano, W. Liu, Y. Hanada, P. Lu, A. Miyawaki, K. Midorikawa, K. Sugioka*, Controllable alignment of elongated microorganisms in 3D microspace using electrofluidic devices manufactured by hybrid femtosecond laser microfabrication, Microsyst. Nanoeng. 3, 16078 (2017).

[2] J. Xu*, D. Wu, J. Y. Ip, K. Midorikawa, K. Sugioka*, Vertical sidewall electrodes monolithically integrated into 3D glass microfluidic chips using water-assisted femtosecond-laser fabrication for in situ control of electrotaxis, RSC Adv. 5, 24072~24080 (2015).

[1] J. Xu*, D. Wu, Y. Hanada, C. Chen, S. Wu, Y. Cheng, K. Sugioka*, K. Midorikawa, Electrofluidics fabricated by space-selective metallization in glass microfluidic structures using femtosecond laser direct writing, Lab Chip 13, 4608~4616 (2013).

Recent publications

2024

[1] Y. Song, J. Xu*, X. Li, A. Zhang, Y. Cheng*, Energy-dependent correlation between micro/nano-morphology and stress state of femtosecond laser-induced modification in fused silica, Opt. Laser Technol. 176, 110901 (2024).

[2] A. Zhang, J. Xu*, L. Xia, M. Hu*, Y. Song，M. Wu, Y. Cheng*, Efficient synthesis of vitamin D3 in a 3D ultraviolet photochemical microreactor fabricated using an ultrafast laser, Light: Adv. Manuf. 5, 10 (2024). 

[3] Y. Song, J. Xu*, Z. Liu, A. Zhang, J. Yu, J. Qi, W. Chen, Y. Cheng*, Fabrication of high-aspect-ratio fused silica microstructures with large depths using Bessel-beam femtosecond laser-assisted etching, Opt. Laser Technol. 170, 110305 (2024).

[4] Q. Huang#, T. Yang#, Y. Song#, W. Sun, J. Xu*, Y. Cheng*, R. Yin, L. Zhu, M. Zhang, L. Ma, H. Li, H. Zhang*, A three-dimensional (3D) liver–kidney on a chip with a biomimicking circulating system for drug safety evaluation, Lab Chip 24, 1715~1726 (2024).

[5] Y. Zhu#, J. Xu#, D. Zhang, A. Zhang, B. Chen, B. Zhao, X. Qian, Y. Cheng*, F. Feng*, An all-glass based micro gas chromatographic column for light hydrocarbon separation with HKUST-1 as stationary phase, Anal. Chim. Acta 1287, 342057 (2024).

2023

[1] J. Yu, J. Xu*, Q. Dong, J. Qi, J. Chen*, A. Zhang, Y. Song, W. Chen, Y. Cheng*, Low-loss optofluidic waveguides in fused silica enabled by spatially shaped femtosecond laser assisted etching combined with carbon dioxide laser irradiation, Opt. Laser Technol. 158, 108889 (2023). 

[2] Y. Tan, H. Lv, J. Xu*, A. Zhang, Y. Song, J. Yu, W. Chen, Y. Wan, Z. Liu, Z. Liu, J. Qi, Y. Cai*, Y. Cheng*, Three-dimensional isotropic microfabrication in glass using spatiotemporal focusing of high-repetition-rate femtosecond laser pulses, Opto-Electron. Adv. 6, 230066 (2023).

[3] R. Hu#, X. Li#, J. Xu#, Y. Cheng, M. Zhang*, G. Shi, Continuous preparation of semiconducting polymer nanoparticles with varied sizes for online fluorescence sensing via a laser-tailored 3D microfluidic chip, Anal. Chem. 95, 10422~10429 (2023).

[4]  Y. Zhu#, J. Xu#, H. Zhang, A. Zhang, B. Chen, B. Zhao, L. Li, X. Qian, Y. Cheng*, F. Feng*, A micro gas chromatography column fabricated by ultrafast laser-assisted chemical etching, Sens. Actuators B Chem. 375, 132814 (2023).